Height Restriction Barrier

Height Restriction Barriers are designed to protect overhead equipment, industrial doors, HVAC ducts, fire sprinkler pipes, overhead walkways, and all kinds of assets subject to potential impact at elevated heights.

Suitable for outdoor and indoor applications, including Parking Lot entrance doors. Upon request, Height Restrictors can be equipped with sound sensors to improve alarm notice in case of an impact.

To understand which Height Restrictor model suits best the needs, it starts from assessing the Impact Safety Risk:

Type of material handling equipment moving around: vehicle model & weight (Kg)
Average speed at which the material handling equipment runs: km/h
Possible angle of impact for Height Restrictor is always 90°

The mix of this data helps our Safety Consultant to advise about the best guardrail model and its applications. Contact us for more on-line information or free on-site consultancy.

Height Restriction Barrier Parameters

Bollards

Diameter D1/D2 mm	Height H - mm		Resistance joules	Anchoring Pullout kN	Total Floor Space mm	IP Grade	Flame Extinguishing Rate
140/120	1600-4080		23950	60	1 370	59	UL94: HB

Diameter
D1/D2 mm

Height

H - mm

Resistance
joules

Anchoring Pullout
kN

Total Floor Space

mm

IP Grade

Flame Extinguishing Rate

140/120

1600-4080

23950

60

1 370

59

UL94: HB

Customized solution and colours upon request

Rails

Diameter mm	Height H - mm	Length L - mm	Resistance joules	Total Floor Space mm	IP Grade	Flame Extinguishing Rate
55	110	2000-3000-4000	7 930	250	59	UL94: HB

Customized solution and colours upon request

Applications

Building Protection

Trolley Protection

Conveyors Protection

Rack Protection

Compliant Crash Testing

We test our products in compliance with the industry's World-class standards: PAS13:2017 and UNI 11886.

We measure barriers resistance in "Joules" according to the following formula:
Kinetic Energy = 1/2*m*v² | M= Mass (Kg) and V = Velocity (Km/h)
We make sure test only on real floor: armed concrete; we don't test on metal platforms.
We make sure vehicle impact takes place at the worst-scenario angle: 90°.

Finally, Bambarrier Guardrails is certified compliant when:

It stops the crashing vehicle safely without breaking itself and without breaking the floor.
It can be hit repeatedly without getting loose and without breaking the floor.
When after an impact, it occupies a very small space on the floor.